Infinite L-com HGX-PRM-ARM Manual

Non-Penetrating Antenna Peak Roof Mount 34-inch Pole Only
HGX-PRM-ARM
Features
• Easy assembly instructions
• 5 ft tall center mast
• Secondary arm of 2.75 ft
• Powder coated galvanized steel
• Operating windspeeds up to 50 KM/h (31 mph)
Applications
• De-centralized wireless networks (FreedomFi, Helium, POLLEN,
XNET, MetaBlox, etc.)
• Wireless or satellite antenna
Description
The L-com's HGX-PRM-ARM is a non-penetrating antenna peak roof mount pole which has strong and rugged design for antenna
installations. The non-anchoring roof mount 34-inch pole is made of galvanized steel and powder coated to withstand harsh weather
and corrosion. Our peak roof mount is designed for telecom installers, DIY installers, and satellite dish installers.
The communication antenna mount operates at windspeeds up to 50 Km/h or 31 MPH and survives at windspeeds up to 100 Km/h or
62 MPH. This non-anchoring roof mount pole comes in 2.36-inch length, 2.36-inch width and 33.46-inch height. The peak roof mount is
suitable for wireless internet providers, crypto enterprises, and commercial building owners.
This non-penetrating antenna peak roof mount pole doesn't need screws or anchors, which minimizes damage to the roofs. The non-
penetrating antenna peak roof mount offers maximum surface tension and protection. The non-penetrating antenna mount is used for
peak roofs and is available with easy assembly instructions.
The L-com has the largest in-stock selection of non-penetrating antenna peak roof mount pole with same-day shipping for domestic and
international orders. Our portfolio includes coaxial cable assemblies, connectors, adapters, NEMA rated enclosures, and an RF product
line which includes antennas, amplifiers, passive, and active components. For further information on similar products, our expert techni-
cal support and knowledgeable sales team can help you get the non-penetrating antenna peak roof mount 33-inch pole as per your
requirement.
Note: Ballast data should be determined by a local professional engineer. Adequate ballast material must be determined and provided
by others.
Click the following link (or enter part number in "SEARCH" on website) to obtain additional part information including price, inventory and certifications:
Non-Penetrating Antenna Peak Roof Mount 34-inch Pole Only
1
• Survival windspeeds up to 100 KM/h (62 mph)
• All assembly hardware included
• Optional mat for max surface tension/protection
• Standard 16" x 8" cinder blocks (Not included)
• 150-degree max angle for roof pitch
• Scientific and weather instrumentations
• Security camera and instruments
• Solar panel
HGX-PRM-ARM REV 1.1 | © 2020 Infinite Electronics, Inc. L-com is a registered trademark of Infinite Electronics, Inc.
USA & Canada +1(800) 341-5266 | International +1(978) 682-6936 | L-com.com