Download Print this page

Infinite ShowMeCables SMC-SWD5609D Owner's Manual

Hinged wall-mount rack (9u/12u/15u)

Advertisement

Quick Links

Cables and Connectors Since 1995
OWNER'S MANUAL: Hinged Wall-Mount Rack (9U/12U/15U)
THIS MANUAL APPLIES TO THE FOLLOWING SKUs: SMC-SWD5609D, SMC-SWD5612D, SMC-SWD5615D
Keep this information for further reference.
Thank you for purchasing a SMC product.
Please examine the product for any damaged parts. If any part is damaged or missing, contact SMC for assistance. Do not attempt to
install or use product if it has been damaged. This product contains small items that could be a choking hazard – keep these items
away from children.
During installation, lay product contents on cardboard or other protective surface to avoid any damage.
Do not use with equipment that is heavier than the indicated weight capacity for this product. This product is designed to be installed
indoors on wood stud walls, solid concrete walls or brick walls. Make sure that the supporting surface will safely support the weight of
the equipment and all attached hardware and components. It is recommended that installation be performed by a qualified installer.
SMC cannot be held responsible for damage to equipment or personal injury resulting from improper use or installation of product.
Maintenance: Check that the product is secure and safe to use at regular intervals (at least every three months).
Limitations of Liability: In no event will SMC, LLC. be liable for any damages, whether direct or indirect, special, punitive, incidental or
consequential damages (including, but not limited to, lost profits or revenue, loss of use, lost business opportunities or loss of goodwill)
or for the costs of procuring substitute products, arising out of or in connection with the use of the product, whether such liability arises
from any claim based upon contract, warranty, tort (including negligence), product liability or otherwise, whether or not seller has been
advised of the possibility of such loss or damage. In no event will seller's total cumulative liability, from all causes of action and all
theories of liability, exceed the total amounts actually paid to seller by customer under the order that gives rise to any liability
hereunder.
1
© 2023 Infinite Electronics, Inc., ShowMeCables is a registered trademark of Infinite Electronics, Inc.
+1 (888) 519-9505 | sales@showmecables.com |
showmecables.com
© 2020 NavePoint, LLC
20200910-01

Advertisement

loading
Need help?

Need help?

Do you have a question about the ShowMeCables SMC-SWD5609D and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Infinite ShowMeCables SMC-SWD5609D

  • Page 1 © 2023 Infinite Electronics, Inc., ShowMeCables is a registered trademark of Infinite Electronics, Inc. +1 (888) 519-9505 | sales@showmecables.com | showmecables.com...
  • Page 2: Parts Identification

    12U (x12) 9U (x12) 12U (x12) 15U (x24) 15U (x24) 15U (x24) Tools Required: Phillips Screwdriver (not included) www.NavePoint.com customerservice@navepoint.com © 2023 Infinite Electronics, Inc., ShowMeCables is a registered trademark of Infinite Electronics, Inc. +1 (888) 519-9505 | sales@showmecables.com | showmecables.com...
  • Page 3: Rack Assembly

    M6*12mm Screws (D), 4 of the M6 Flat Head Screws (F) and 8 of the M6 Flange Nuts (E) using a Phillips Screwdriver. www.NavePoint.com customerservice@navepoint.com © 2023 Infinite Electronics, Inc., ShowMeCables is a registered trademark of Infinite Electronics, Inc. +1 (888) 519-9505 | sales@showmecables.com | showmecables.com...
  • Page 4 Hinges (H)and secure them with 4 of the M4 Tapping Screws (G) using a Phillips Screwdriver. www.NavePoint.com customerservice@navepoint.com © 2023 Infinite Electronics, Inc., ShowMeCables is a registered trademark of Infinite Electronics, Inc. +1 (888) 519-9505 | sales@showmecables.com | showmecables.com...
  • Page 5 Make sure the wall surface can hold both the weight of the cabinet and the rack-mounted equipment. www.NavePoint.com customerservice@navepoint.com © 2023 Infinite Electronics, Inc., ShowMeCables is a registered trademark of Infinite Electronics, Inc. +1 (888) 519-9505 | sales@showmecables.com | showmecables.com...
  • Page 6: Equipment Installation

    Place the plastic washers between the screws and the equipment mounting brackets. www.NavePoint.com customerservice@navepoint.com © 2023 Infinite Electronics, Inc., ShowMeCables is a registered trademark of Infinite Electronics, Inc. +1 (888) 519-9505 | sales@showmecables.com | showmecables.com...

This manual is also suitable for:

Showmecables smc-swd5612dShowmecables smc-swd5615d