Summary of Contents for Audio enhancement XD MICROPHONE
Page 1
XD MICROPHONE QUICK START GUIDE Up/Down—Remote Volume controls Source Indicator OWN, OTHER, LINE Alert switch Alert switch Battery and power Battery charging status indicator status indicator REC—starts/stops recordings SELECT—Adjust, change, PWR/MUTE—Power On/Off select which source (OWN, OTHER or LINE) and mute control...
Page 2
TEACHER MICROPHONE LINKING With the microphone off, press the Link With the microphone off, press button on the front of the amplifier or and hold REC button. Then side of the BEAM (Look for the blinking promptly press and hold PWR yellow LED) until microphone is linked.
Page 3
STUDENT MICROPHONE LINKING Press and hold the PWR LINK While holding use your thumb to slide the TALK button up into to button on the back of the XD Student Microphone the on position. Successful linking will produce an audible beep as well as an additional green LED.
Page 4
CHARGING YOUR XD MICROPHONE Connect the Micro-USB plug of the charger to the DC input terminal of the microphone. After connecting the microphone to the charger, the charge indicator (red) indicates the charging status When the charge indicator stops blinking, the microphone is fully charged. If the charge indicator is blinking rapidly it means that the Micro-USB isn’t fully inserted...
Need help?
Do you have a question about the XD MICROPHONE and is the answer not in the manual?
Questions and answers