Phone Software Updates - Nokia 6131 User Manual

Security level > Phone
whenever a new SIM card is inserted into the phone. If you select
Memory, the phone asks for the security code when the SIM card
memory is selected, and you want to change the memory in use.
Access codes — to change the security code, PIN code, UPIN code, PIN2
code, or barring password
Code in use — to select whether the PIN code or UPIN code should be
active
Authority certificates
authority or user certificates downloaded into your phone. See
"Certificates," p. 100.
Security module settings
Module PIN request, or change the module PIN and signing PIN. See also
"Access codes," p. 10.

■ Phone software updates

Your service provider may send phone software updates over the air
directly to your device. This option may not be available, depending on
your phone.
Warning: If you install a software update, you cannot use the
device, even to make emergency calls, until the update is
completed and the device is restarted. Be sure to backup data
before accepting a software update.
Settings
To allowed or disallow phone software updates, select
Settings > Configuration
Service prov. sw updates
Always allow — to perform all software downloads and updates
automatically
Confirm first — to perform software downloads and updates only after
your confirmation (default setting)
Always reject — to reject all software updates
— to set the phone to ask for the security code
or User certificates
— to view Security module
> Device manager settings
and following options:
— to view the list of the
details, activate
Menu
>
S e t t i n g s
>
69