IQOS ILUMA ONE™ Status Lights Button Charging Port Charging Power Adaptor Charging Cable IQOS ILUMA™ is compatible only with SMARTCORE STICKS™ FEATURES SUPPORT AND AND SETTINGS SERVICES You can modify your For information on IQOS experience customer support and according to your...
Getting Started TURN ON CHARGE Press and hold Button for Before first use, fully charge 4 seconds, then release; your IQOS ILUMA ONE™ Status Lights will turn on with Power Adaptor and slowly. Charging Cable. (approx. 90 min)
Page 4
How to use your IQOS ILUMA ONE™ OPEN 1. INSERT SMARTCORE STICK™ Slide to open. Insert the SMARTCORE STICK™ to the line on filter with filter facing outside. " 2. START HEATING 3. BEGIN USE Press Button for at least...
Page 5
How to use your IQOS ILUMA ONE™ EXPERIENCE COUNTDOWN 4. NEARLY COMPLETE During use, Status Light(s) To signal the last 30 seconds indicate the remaining time. or last 2 puffs, IQOS ILUMA ONE™ will vibrate with one Light pulsing white.
Lights will turn on to charge. indicate battery level. AUTOSTOP LIGHTS BLINK WHITE TWICE During use, the experience IQOS ILUMA ONE™ is outside will stop if the specifically operating temperature range designed tobacco stick is (0°C~40°C). moved, or removed from the...
Page 7
Quick Tips " LIGHT BLINKS RED TO RESET Reset IQOS ILUMA ONE™. Press Button for 10 seconds If red light blinking persists, then release. All Status contact Customer Care. Lights will turn OFF, and turn ON, to confirm a RESET.