Flywheel Repair; Remove; Install - Yale GDP16-20AF Maintenance Manual

Flywheel Repair

NOTE: This flywheel
GDP16-20AF/BF
GC/GLC030-040AF,
(GP/GLP/GDP030-040AF) models.

REMOVE

1. Remove capscrews for flywheel. Then remove fly-
wheel and flange. See Figure 51.
2. If necessary, remove adapter plate.
NOTE: EARLIER MODEL TORQUE CONVERTER HOUSING IS SHOWN. LATER MODEL IS SIMILAR.
1. FLANGE
2. FLYWHEEL
3. DRIVE PLATE
22
Flywheel Repair
repair is for GP/GLP/
(GP/GLP/GDP030-040AF/BF),
and GLP/GDP16-20AF
Figure 51. Flywheel and Torque Converter

INSTALL

1. If adapter plate for the torque converter housing
was removed, install it on engine. See Figure 51.
Tighten capscrews to 43 to 51 N•m (32 to 38 lbf ft).
2. Install flange and flywheel on crankshaft.
3. Apply thread-locking adhesive on threads of cap-
screws. Then install capscrews and lockwashers.
Tighten capscrews to 96 to 103 N•m (71 to 76 lbf ft).
4. TORQUE CONVERTER
5. ACCESS COVER
6. TORQUE CONVERTER HOUSING
600 YRM 496