Electrolux FRIGIDAIRE LFID2459VF1A Use & Care Manual page 6

OPERATING INSTRUCTIONS
Heat Dry
The HEAT DRY option in combination with rinse
aid will enhance drying performance. HEAT DRY
option is available on all cycles.
Air Dry
The AIR DRY option will reduce temperature in the
hot rinse of the selected wash cycle. This option
will slightly decrease energy usage but will increase
the likelihood that dishware will not be dry.
Child Lock Controls
To prevent children from accidentally changing the
dishwasher cycle or starting the dishwasher, lock
the dishwasher controls by pressing the DELAY
START pad until the status window displays "loc".
To unlock the controls, press the DELAY START
pad until "loc" is no longer displayed in the status
window.
To Cancel a Cycle and Delay Start
Both running cycle and delay countdown can be
cancelled at any time.
Open the dishwasher door and press the START/
CANCEL pad until you hear a tone. The running
cycle or delay countdown is cancelled.
If desired, a new cycle can now be selected, by
pressing START/CANCEL pad and closing the door
immediately, the new cycle will begin.
To Cancel a Setting
If you have selected your cycle and options and
decide to cancel, by pressing the START/CANCEL
pad, the unit will go into a stand-by mode, which
all LEDs will go out.
6
Delay Start
The DELAY START option allows you to
automatically delay starting your dishwasher from
1-24 hours.
Select your desired cycle and options, then press
the DELAY START pad until the desired delay
time displays in the status window. The LEDs of
selected cycle and options are illuminated. The
status window displays the delay time and then
displays 'Press Start'.
To start the delay countdown, press START/
CANCEL pad and close door immediately.
The status window displays 'Close' after the
START/CANCEL pad is pressed.
A tone will sound indicating that the countdown
has started after the door is closed. The selected
cycle starts when the countdown is completed.
Opening the door during cycle
If door is opened while a cycle is running or delay
is counting down, the dishwasher will stop running.
The LEDs of selected cycle and options are
illuminated, the status window displays the
remaining cycle time or delay time and displays
'Press Start'.
To resume, press START/CANCEL pad and close
the dishwasher door immediately. The status
window displays 'Close' after the START/CANCEL
pad is pressed.
A tone will sound indicating that the dishwasher
will begin running from the point of interruption
after the door is closed.
If the dishwasher door is kept open for too
long, or the door is closed without pressing
START/CANCEL pad, the running cycle or delay
countdown will be cancelled.
Status Indicator Lights
The CLEAN light will remain on after door is opened.
When the SANITIZE option is selected and the
criteria is met, the Sanitized indicator will display
and remain on after the door is opened. If the
sanitization criteria is not achieved, the indicator
will not display. This can happen if the cycle is
interrupted or if the sanitization temperature
could not be reached due to incoming water
temperature significantly below 120°F.