LG OLED97M3 Series Directions For Usage And Maintenance page 5

Installing and Using
Examining the Appearance and Component Names of the Wireless TV (TV Screen +
Zero Connect Box)
TV Screen
Zero Connect Box (WM23EA)
It is a device that wirelessly transmits video and audio signals to the TV screen
by connecting an external antenna or set-top box.
Front and top views
Rear view
Wireless signal receiver & Power button
This part receives the video and audio signals sent by the Zero Connect Box.
The power button is used to turn the TV screen on, switch to Always Ready
mode, and pair with the Zero Connect Box.
Sliding button
The transmission direction of the Zero Connect Box antenna can be adjusted
within a range of 0 to 50° up or down.
Dial
The wireless signal transmitter of the Zero Connect Box can be adjusted
within a 90° range left or right.
Top LED
• Indicates the strength and status of the wireless signal.
• Blue (good), Green (normal), Yellow (weak), Red blinking (disconnected)
Wireless signal transmitter
The part with the antenna that transmits video and audio to the TV screen.
The antenna's transmission direction can be adjusted up, down, left, or right
using the sliding button and the dial.
Front LED
Indicates the power or operation status of the Zero Connect Box.
Voice recognition unit
The part that recognises the user's voice. It may not function properly if this
part is blocked or if commands are given from the side or back of the Zero
Connect Box.
External connection terminal
You can connect the Zero Connect Box's power cord and external video/audio
devices such as external antennas and set-top boxes.
Pairing button
The product comes pre-paired, but if the normal screen does not appear, you
need to pair it again.
• To re-pair, press the pairing button on the back of the Zero Connect Box
for 5 seconds. The top LED flashes white.
• If you press and hold the power button on the TV Screen for 5 seconds,
the standby indicator of the screen's power unit flashes white. Once
pairing is complete, the top LED on the Zero Connect Box changes to a
colour indicating signal strength.
• If pairing is not resumed within one minute, it will be cancelled and
must be initiated again.
5