TRENDnet TBW-103UB Quick Installation Manual page 12

Q8: Windows is unable to recognize my hardware. What should I do?
A8:
Make sure your computer meets the minimum requirements as specified in
Section 1 of this quick installation guide. Also, you must install the wireless
configuration utility (as described in Section 3) before connecting the wireless USB
Adapter.
Q9: I cannot open the wireless configuration utility. What should I do?
A9:
Go to your device manager (control panel system) to make sure the adapter
is installed properly. If you see a networking device with a yellow question mark or
exclamation point, you will need to reinstall the device and/or the drivers.
If you still encounter problems, please refer to the User's Guide CD-ROM or contact
technical support.
10