TRENDnet TPL-111BR Frequently Asked Questions Manual page 4

TPE-111BR F.A.Q.
Q: How do I change the IP Address of my TPL-111BR?
A:
Step 1. Open your web browser and type the IP address of the TPL-110AP in the address bar.
The default IP address is 10.0.0.3. At the login, enter your username (admin) and
password (admin).
Step 2. Click on "LAN' at the top of the page.
Step 3. You can change the IP Address of the unit in the corresponding IP Address field.
Q: How do I configure the TPL-111BR?
A:
First configure your Wireless Ethernet Adapter to connect to the "default" SSID.
Note: If you are using a hard-wired computer through another PowerLine device, or connected
directly to a LAN port, you will use the Local Area Connection that is bound to your Ethernet
Adapter.
Step 1. Click Start then click on the Control Panel. For Windows 2000 click on Start, highlight
settings then click on the Control Panel.
Step 2. Double-Click on the Network Connection icon.
Step 3. Right-Click on the Wireless Network Connection icon then click on Properties. For
Windows 2000 it will be listed as Local Area Connection. Make sure you are selecting
the Local Area Connection that is bound to your Wireless Ethernet Adapter.