Battery Cable; Removing The 4-Cell Battery Cable - Dell Precision 3470 Service Manual
Hide thumbs
Also See for Precision 3470:
- Service manual (82 pages) ,
- Owner's manual (51 pages) ,
- Technical manualbook (46 pages)
Table of Contents
Advertisement
About this task
The following images indicate the location of the 4-cell (64 Wh) battery and provide a visual representation of the installation
procedure.
Steps
1. Align the screw holes on the 4-cell battery with the screw holes on the palm-rest and keyboard assembly.
2. Replace the two screws (M2x3) that secure the 4-cell battery to the palm-rest and keyboard assembly.
3. Connect the battery cable to the connector on the system board.
Next steps
1. Install the
microSD
card.
2. Install the
base
cover.
3. Follow the procedure in
Battery cable
Removing the 4-cell battery cable
Prerequisites
1. Follow the procedure in
2. Remove the
microSD
3. Remove the
base
cover.
4. Remove the battery.
NOTE:
If battery is disconnected from system board for service, then there is a delay during system boot as the system
undergoes RTC battery reset.
About this task
The following images indicate the location of the battery cable and provide a visual representation of the removal procedure.
After working inside your
Before working inside your
card.
computer.
computer.
Removing and installing components
29
Advertisement
Table of Contents
