Table of Contents
Advertisement
8. MAINTENANCE
(1) Please make sure to turn the power switch off before cleaning the sewing machine.
(2) Please pay attention to that staining your skin or eyes with oil may cause an inflammation.
8-1. Cleaning
(1) Remove the dust and the thread waste sticking regularly.
8-2. Greasing
(1) The dust or the like sticking absorbs lubrication oil on the rails and significantly lowers the slide guide
running life. Remove the dust and the thread waste sticking regularly and greasing every six months.
(2) For the guide rail, grease to the both side of guide groove. For the spline shaft and ball screw shaft,
grease to the surface of shaft. After greased, apply the grease uniformly by moving the XY table by
hand.
NOTE This operation required to removing the XY cover and shutter.
<1>: X guide rail
<2>: Y guide rail
<3>: Spline shaft
<4>: Ball screw shaft
Recommended grease: Lithium grease 2
<2>
<1>
CAUTION
<4>
- 46 -
<3>
Advertisement
Table of Contents
