Advertisement

Quick Links

INTRODUCTION
Thank you for choosing Tornado Industrial Vacuum Cleaner, a high-quality product
based on the newest state-of-the-art technology. We hope that this device will be
to your satisfaction and meet your expectations. We are continuously striving to
improve our products in our product segment and will continue to supply the market
with new equipment.
NOTICE!
1.These instructions are only for TIV1000/TIV2000/TIV3000 Dust Extractors.
2. The TIV1000/TIV2000/TIV3000 Dust Extractors are designed to clean construction areas and
be connected to small electrical machines such as drills, grinders etc. The machine is suitable
for picking up dry, non-flammable dust and debris in and indoor environment. It is not suitable
for picking up liquids.
3. Please pay particular attention to the safety regulations and safety instructions
4. Read the complete instruction manual before using.
5. All spare parts and accessories used with this device must be those specified by Tornado.
6. Check before and after use that all the switches are in OFF position.
Environmental protection
The packaging material can be recycled. Please do not throw the packaging material into
household waste; please send it for recycling.
Old devices contain valuable materials that can be recycled; these should be sent for
recycling. Batteries, oil, and similar substances must not enter the environment. Please dispose
of your old devices using appropriate collection systems.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TIV1000 and is the answer not in the manual?

Questions and answers

Summary of Contents for Tornado TIV1000

  • Page 1 3. Please pay particular attention to the safety regulations and safety instructions 4. Read the complete instruction manual before using. 5. All spare parts and accessories used with this device must be those specified by Tornado. 6. Check before and after use that all the switches are in OFF position.
  • Page 2: Safety Instructions

    1. SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should always be followed, including the following: WARNING – To reduce the risk of fire, electric shock or injury: Cables damaged through crushing or splitting can be dangerous if used and should be replaced ...
  • Page 3 THERMAL PROTECTION The dust extractor is equipped with a safety thermal protector to prevent motor from overheating. Should thermal protector activate, turn off machine, unplug power cord and check for full dust bag, vacuum hose clog or filter blockage. It may take up to 45 minutes for the thermal protector to reset.
  • Page 4: Height Adjustment

    3. FUNCTION The machine is designed for vacuuming and separating dry, non-combustible dust with an explosion limit value of 0.1mg/m The dust extractor is started by the switch. All the switches can operate independently. Type Models with Jet pulse filter cleaning Red switch 2 step 0: Motor off, 1: Motor on Notice !!!...
  • Page 5: Filter Cleaning

    Grip the 2 handles on barrel, lift to the top and then loose the grip slowly. Dropping operating: Grip the 2 handles on barrel, lift to the top, hold for one second, then drop it down to the bottom. Lifting Dropping 5.
  • Page 6: Filter Change

    7. FILTER CHANGE Risk of dust dispersion - Use personal safety equipment Unhealthy dust can be spread during filter change. Accordingly, the user should wear protective glasses, protective gloves, and a breathing mask conforming to protection class FFP3. WARNING Remember to switch off the machine and pull the plug out of the outlet before servicing. Pre-filter Loosen the 3 clamps and remove the top.
  • Page 7 All Tornado devices and accessories have a 12-month factory warranty counting from the manufacturing date on the machine. Do not attempt to repair the suction apparatus without the consent of the manufacturer. The warranty does not cover defects which are the result of normal wear and tear, negligence, defective use, unauthorized repair or the suction apparatus being connected to the incorrect voltage.
  • Page 8: Problem Solving

    Motor runs but poor suction Loose top cover Adjust Defective gaskets Replace affected gaskets Wrongly assembled or Adjust/Replace filters Dust blown from motor damaged filter system Abnormal noise Order service Notice !!! ____________________________________ Any other problem please contact Tornado order service ______________________________________________________...
  • Page 9: Technical Data

    10. TECHNICAL DATA Data Unit TIV1000/120V TIV1000/230V TIV2000/120V TIV2000/230V TIV3000/120V TIV3000/230V Voltage 120V 230V 120V 230V 120V 230V Power(max) Current(UL) Airflow m³/h (max) Vacuum(Max) mbar Water lift(inch) inch Main hose Metric 4mxD38 4mx D38 7.5mx D50 7.5mx D50 10mxD63 10mx D63...
  • Page 10 TIV1000 230V TIV2000 230V Packing list Packing list Description Quantity Unit TIV2000 dust extractor S8016 D50 S wands C2031 D70/50 reducer S8023 D50 EVA hose Meter S8006 D50 connector S8004 D50 floor brush...
  • Page 11 TIV2000 230V Exploded views Description Quantity Dimension TIV2000 engineer system kit C2142 TIV2000 handle S0013 S0028 Bolt M6*60 C2141 TIV2000 right stand column C1109 TIV2000 girde C2159 TIV series connection plate TIV2000 dustbin kit C2140 TIV2000 left stand column C2083 Nylon cable tie storage container S0011 S0010...
  • Page 12 TIV2000 230V Dustbin kit...
  • Page 13 Description Quantity Dimension C3026 Plastic cover C2118 TIV2000 top cap C2134 Lever (for jet pulse filter cleaning) S0013 C2057 Lever holder S0028 Bolt M6*60 S0088 Cushion S0010 Bolt M6*12 S0011 S0059 Holder kit C2121 TIV2000 barrel B0008 D70 inlet kit C2092 Holder S0023...
  • Page 14 TIV2000 230V Engine kit Description Dimension Note C2126 TIV2000 engine cover Engine kit S0006 Connector PG11 S2005 Cable with electricity plug 3*1.5/8 meters length,- 240V RVV-10A plug S2006 Cable with electricity plug 3*2.0/8 meters length, - 110V RVV-US plug C1106 Baffle C2128 TIV2000 engine cover(front)
  • Page 15 TIV2000 motor package Description Quantity Dimension Notes S0091 C2115 HEPA filter top cover S8031 H13 HEPA filter C2116 HEPA filter cover S0011 C3007 Shock absorption rubber ring S1034 Single phase motor 240V 1000W S1035 Single phase motor 120V 1200W TS1100 S1036 Single phase motor 120V 1000W...
  • Page 16 Product: Vacuum Cleaner Description:220-240V,50/60HZ Model: TIV1000, TIV2000, TIV3000, TIV2500, TIV3500 Are in compliance with the following standards: EN ISO 12100:2010 EN 60335-1:2012/A11:2014 EN 60335-2-69:2015 EN 61000-6-2:2005/AC:2005 EN 61000-6-4:2007/A1:2011 With reference to EC directive applied: Machinery Directive 2006/42/EC Electromagnetic Compatibility 2014/30/EU...

This manual is also suitable for:

Tiv3000Tiv2000

Table of Contents