Tornado TIV7500 Manual

INTRODUCTION
Thank you for choosing Tornado Industrial Vacuum Cleaner, a high-quality product
based on the newest state-of-the-art technology. We hope that this device will be
to your satisfaction and meet your expectations. We are continuously striving to
improve our products in our product segment and will continue to supply the
market with new equipment.
NOTICE!
1.These instructions are only for TIV7500 Dust Extractor.
2. The TIV7500 is a 3 phase Auto Cleaning HEPA Dust Extractor, equipped with a high vacuum
heavy duty turbine motor. The innovated auto cleaning system solved the pain of consistently
manual cleaning every 10-15 mins, allows the operator uninterrupted working. This technology
without air compressor and printed circuit board, it is more reliable and lower maintain cost.
Ideal for clean construction areas and be connected larger size grinders, scarifies, shot
blasters to extract freshly cut, friable concrete dust. The machine is suitable for picking up dry,
non-flammable dust and debris in and indoor environment. It is not suitable for picking up
liquids.
3. Please pay particular attention to the safety regulations and safety instructions
4. Read the complete instruction manual before using.
5. All spare parts and accessories used with this device must be those specified by Tornado.
6. Check before and after use that all the switches are in OFF position.
Environmental protection
The packaging material can be recycled. Please do not throw the packaging material into
household waste; please send it for recycling.
Old devices contain valuable materials that can be recycled; these should be sent for
recycling. Batteries, oil, and similar substances must not enter the environment. Please dispose
of your old devices using appropriate collection systems.