Table of Contents
Advertisement
Available languages
Available languages
PARTS
1. Cool shot on light
2. Outlet grille
3. Inlet grille
4. Hang up loop/cord storage
5. Concentrator attachment
6. Flyaway tamer attachment
7. Curl defining diffuser prongs
INSTRUCTIONS FOR USE
Fitting/Removing attachments (Fig A)
•
CAUTION: Attachments can become hot during use, let them cool before removing.
•
TIP: Holding the cool shot button for a few seconds before removing accessories can help to
reduce their temperature.
•
Attach the diffuser/flyaway tamer by fitting to the front of the hairdryer and twisting
clockwise to lock in place (Fig. A).
•
Attach the concentrator attachment by pushing on to the front of the hairdryer. The
concentrator can be rotated as required.
Using
•
Wash and condition your hair as normal.
•
Squeeze out excess moisture with a towel and comb through.
•
Hairsprays contain flammable material – do not use while using this product.
1. Plug the product into the mains power supply.
2. To switch on, select your desired temperature setting using the heat setting switch. Settings
are 0 off, • low, •• medium and ••• high.
3. Select the desired air speed using the speed setting button. Press the button in for fast, press
the button and release it for slow.
4. To set your style with cold air, press the cool shot button (J) and the light will illuminate.
Press again to turn off cool shot.
How to create smooth styles with the concentrator attachment:
1. For best results, dry your hair as normal until it is about 70% dry. Then turn off your dryer and
section your hair into manageable areas.
2. Select a high heat and fast speed setting.
3. Starting on the lower sections of hair, work on one section at a time. Use a round brush (not
included) to grip the underneath of your hair and run the concentrator attachment down the
section until it's 100% dry.
4. Activate the cool shot and run the nozzle down the section again to set your style in place.
How to finish straight styles with the flyaway tamer attachment:
1. For best results use on dry straight / pre-straightened hair.
2. Select a high heat and fast speed setting.
3. Start at the top of your hair near the roots with the attachement held as close to the hair as
possible. Your hair will be attracted to the attachment.
4. Slowly run down the length of your hair (Fig C)
5. Repeat around the crown of your head, until the desired smoothing is achieved.
8. Gentle drying diffuser attachment
Controls:
J Cool shot button
E Speed setting button
T Heat setting switch
Accessories:
• Storage bag
ENGLISH
GB
DE
NL
FR
DK
NO
PT
SK
CZ
PL
HU
RU
TR
RO
GR
HR
RS
UA
BG
AE
ES
IT
SE
FI
SI
5
Advertisement
Table of Contents
