Zodiac LumiPower Light Installation Manual
Zodiac LumiPower Light Installation Manual

Zodiac LumiPower Light Installation Manual

Concrete niche assembly
Hide thumbs Also See for LumiPower Light:

Advertisement

Quick Links

LumiPower Concrete Niche Assembly
FOR YOUR SAFETY – This product must be installed and serviced by a contractor who is licensed and qualified in pool equipment in accordance with the latest applicable version
of AS3633, along with any other applicable local or council codes/standards. Before installing this product, read and follow all warning notices and instructions that accompany this
product. Failure to follow warning notices and instructions may result in property damage, personal injury, or death. Improper installation and/or operation may void the warranty.
Improper installation and/or operation can create unwanted hazards which may cause serious injury, property damage, or death.
ATTENTION INSTALLER – This manual contains important information about the installation, operation and safe use of this product. This information should be
given to the owner/operator of this equipment.
WARNING
Installation Manual

Advertisement

Table of Contents
loading

Summary of Contents for Zodiac LumiPower Light

  • Page 1 Installation Manual LumiPower Concrete Niche Assembly WARNING  FOR YOUR SAFETY – This product must be installed and serviced by a contractor who is licensed and qualified in pool equipment in accordance with the latest applicable version of AS3633, along with any other applicable local or council codes/standards. Before installing this product, read and follow all warning notices and instructions that accompany this product.
  • Page 2 Serial No. : AUSTRALIA WARRANTY: For full warranty terms and conditions and to register your warranty, visit www. zodiac.com.au/warranty and complete your details.  Or scan the QR code to go directly to the registration page. NEW ZEALAND WARRANTY: For full warranty terms and conditions and to register your warranty, visit www.
  • Page 3 Zodiac LumiPower Concrete Niche Assembly | Installation Manual ® Table of Contents Section 1. Important Safety Instructions ..4 1.1 Safety Instructions ......... 4 Section 2. Package Contents ......5 Section 3. Concrete Niche Installation .... 5 SAVE THESE INSTRUCTIONS...
  • Page 4: Section 1. Important Safety Instructions

    NOTICE The Zodiac Pool and Spa niches are intended for installation in fresh water and salt water swimming pools and spas. It is important to ensure that the lights in which the niches are installed are intended for their appropriate application, either fresh water or salt water.
  • Page 5: Section 3. Package Contents

    Niche LumiPower Light Engine - Concrete 1. Concrete Niche Assembly (P/N 75810-C) 2. Mounting Ring (P/N 75811) 3. Cable, LumiPower Light, 20mm or 35mm (P/Ns 20348 or 20344) 4. Foam Insert, Niche, 147mm (P/N 26938) Figure 1. Securing Lumipower Concrete Niche (Not Shown) 5.
  • Page 6 Zodiac LumiPower Concrete Niche Assembly | Installation Manual ® If a draw wire is not being used, the cable Avoid creating thin sections of concrete to (P/N WT000268 or WT000269) must be fitted minimise the risks of cracking or leaks. It is simultaneously with the conduit installation.
  • Page 7 Zodiac LumiPower Concrete Niche Assembly | Installation Manual ® 10. Press the second, smaller polystyrene foam cover (item 26939) into the mounting ring. This will prevent dirt and debris entering the niche during rendering or tiling and will also help maintain roundness under the weight of the tiles.
  • Page 8 Rosedale Auckland 0632, New Zealand NZBN: 942 903 181 70759 Zodiac.co.nz | 0800 807 665 A Fluidra Brand ©2023 ZODIAC is a registered trademark of Zodiac International S.A.S., used under license. This document is subject to change without notice. H0812600_REVA...

Table of Contents