TP-Link TL-SF1006P Installation Manual

Installation Guide
6-Port 10/100Mbps Desktop Switch with 4-Port PoE+

Switch Explanation

Priority (Port 1–2)
Off: All the ports transmit data in the same priority.
On: Port 1 and 2 transmit data in a higher priority than other ports. When
congestion occurs, packets which are transmitted by the ports with higher
priority occupy the whole bandwidth.

Connection

PoE Ports (1-4)
IP Camera
PoE Devices
AP IP Phone

LED Explanation

Power
On:
Off:
Power
Link/Act and PoE Status
On:
Flashing:
Off:
On: Providing PoE power
Flashing: Current-overload/Short-circuit
Off: Not providing PoE power
Extend (Port 1–4)
Off: Port 1–4 run at 10/100 Mbps and support PoE power supply up to 100 m
away.
On: Port 1–4 run at 10 Mbps and support PoE power supply up to 250 m away.
DC Power Adapter
Network Video Recorder
Note: 1. PoE ports can also connect to non-PoE devices, but only transmit data.
2. TL-SF1006P can supply up to 30 W for each PoE port and 67 W for all PoE ports.
PoE MAX
On: 60 W≤Total power supply < 67 W
Power on
Power off
Flashing: Total power supply ≥ 67 W
PoE Max
Off: Total power supply < 60 W
Link present but no activity
Transmitting/receiving data
No link
AC Power Cord
Ethernet Ports (1-6)
Router
LAN Port WAN Port
Internet