Download Print this page

New Holland Sidewinder II Operator's Manual page 11

Range command/power command - tractor
Hide thumbs Also See for Sidewinder II:

Advertisement

TO THE OWNER
GENERAL INFORMATION
This Manual has been prepared to assist you in the
correct procedure for running--in, driving and
operating and for the maintenance of your new
tractor. Read this Manual carefully. Your tractor is
intended for use in normal and customary
agricultural applications.
If at any time you require advice concerning your
tractor, do not hesitate to contact your authorised
dealer. He has factory trained personnel, genuine
manufacturers' parts and the necessary equipment
to carry out all your service requirements.
Your tractor has been designed and built to give
maximum performance, economy and ease of
operation under a wide variety of operating
conditions. Prior to delivery, the tractor was carefully
inspected, both at the factory and by your dealer to
ensure that it reaches you in optimum condition. To
maintain this condition and ensure trouble--free
operation, it is important that the routine services, as
specified in Section 4 of this Manual, are carried out
at the recommended intervals.
OPERATORS MANUAL STORAGE
The Operators Manual supplied with your tractor is
an important source of information and should be
stored safely.
This manual is written specifically for your tractor so
it is important that you make a note of the print
number and issue date which can be found on the
cover. In the event the manual is lost or damaged it
can be replaced with the correct version.
A storage pocket for the Operators Manual can be
found on the rear of the seat. The manual should be
kept in this pocket at all times when not in use.
SAFETY
Pages 1--8 to 1--36 inclusive list the precautions to
be observed to ensure your safety and the safety of
others. Read the safety precautions and follow the
advice offered before operating the tractor.
SECTION 1
GENERAL INFORMATION AND SAFETY
CLEANING THE TRACTOR
Your tractor is a state-of-the-art machine with
sophisticated, electronic controls. This should be
taken into consideration when cleaning the tractor,
particularly if using a high pressure washer. Even
though every precaution has been taken to
safeguard electronic components and connections,
the pressure generated by some of these machines
is such that complete protection against water
ingress cannot be guaranteed.
When using a high pressure washer, do not stand too
close to the tractor and avoid directing the jet at
electronic components,
breathers, seals, filler caps, etc. Never direct a cold
water jet at a hot engine or exhaust.
ELECTRO-MAGNETIC INTERFERENCE (EMC)
This tractor complies strictly with the European
Regulations
on
electro-magnetic
However, interference may arise as a result of
add-on equipment which may not necessarily meet
the required standards. As such interference can
result in serious malfunction of the unit and/or create
unsafe situations, you must observe the following:
Ensure that each piece of non-New Holland
equipment fitted to the tractor bears the CE
mark.
The maximum power of emission equipment
(radio, telephones, etc.) must not exceed the
limits imposed by the national authorities of the
country where you use the tractor.
The electro-magnetic field generated by the
add-on system should not exceed 24 V/m at any
time and at any location in the proximity of
electronic components.
Failure to comply with these rules will render the New
Holland warranty null and void.
electrical connections,
emissions.
1--1

Advertisement

loading

This manual is also suitable for:

T6030T6050T6070T6080T6090