TRENDnet TEG-224WS Specifications

FEATURES
•
24 x 10/100Mbps Auto-negotiation MDIX Fast Ethernet Ports
•
2 x 10/100/1000Mbps Auto-negotiation, Auto-MDIX Gigabit Ports
•
Full/Half duplex mode for each port (Full Duplex Mode only for Gigabit Ports)
•
Store and Forward switching method
•
Integrated address Look-Up Engine with 6K absolute MAC address table
•
Supports 4Mbits RAM Data Buffering
•
Extensive diagnostic LED's on the front panel
•
IEEE 802.3x flow control for full-duplex mode
•
Back pressure flow control for half-duplex mode
•
Easy configuration the device from a Web browser
•
Supports Port-Based VLAN and Port-Based IEEE 802.1p QoS
•
Supports Trunking (gigabit ports) and Port Mirroring
•
Support Port setting function allow user setting each port's speed, duplex mode, and flow control
•
Standard 19" Rack-mount design
•
5-Years Warranty
BENEFITS
Easy Upgrade:
Ethernet workgroups are able to upgrade to Fast Ethernet by changing adapters and a hub without changing
switches.
Flexibility:
Easy management and configuration through Web browser
Performance:
Provides non-blocking high performance with internal switch controller.
Cost-Effectiveness:
The TEG-224WS presents Gigabit Ethernet at an affordable rate.
26-port 10/100/1000Mbps Gigabit
Web-Based Smart Switch
TEG-224WS
TRENDnet's TEG-224WS 26-port 10/100/1000Mbps Web-Based
Smart Switch is the ideal Switch for network segmenting and
flexibility. It has 24 10/100Mbps and 2 10/100/1000Mbps Auto-
Sensing and Auto-MDIX ports. TEG-224WS supports web
browser configuration allowing Network Administrators to
configure speed, VLAN, QoS, Trunking and Mirroring down to the
port level. TRENDnet's TEG-224WS is powerful, easy-to-use and
enhances network security.
TEG-224WS
rev:02. 1 7.2006