Antenna Settings For Diseqc 1.0/1.1 And Searching Digital Channels From A Satellite Automatically - Grundig 65 GOS 9799 FINE ARTS OLED User Instructions

SETTING­FURTHER­CHANNELS
10­ Select Scan Mode.
To select whether you want to search for
only free digital television channels (Free),
only scrambled digital television channels
(Scrambled) or both (Free + Scrambled),
press » « or »
V Λ
and mark or unmark the »Free« and/or
»Scrambled« items.
11­ Press » « (red) to start searching.

Notes:
W hen updating via the same satellites a
7
security query is displayed at the start of a
search.
I f the previously stored channels should
7
be retained in the channel list and the new
channels found be added to it, then press
» « (green).

I f » « (red) is pressed, the saved channels

7
will be deleted from the current channel list.
– T he »Digital Searching« menu appears,
and the scan for TV channels begins.
– T he search is complete as soon as the
message »Search is completed!« appears.
Note:
The search can be aborted with »EXIT«.
7
12­ Switch to the Channel Editor with »
(yellow);
or
press »EXIT« to end the setting.
« and press OK« to select
«

­-----------------------------------------------------
Antenna­settings­for­DiSEqC­
1.0/1.1­and­searching­digital­
channels­from­a­satellite­auto-
matically
Note:
The following description about the LNB set-
7
tings premise a substantial expertise about
the satellite systems. Ask your specialist
dealer.
1­ Open the menu with »MENU«.
2­
Select menu item »Settings« with »
< >
» « or » « and press »OK« to confirm.
3­ Select the menu item »Source« with »
<
» « and press »
V
– » Source« menu is active.
4­
Select the line »Automatic Channel Search«
with » « or » « and press »OK« to
V Λ
confirm.
5­ Select the option »Satellite (DVB-S/S2)«
with » « or » « and press »OK« to
V Λ
confirm.
6­
Select the line »Antenna Settings« with »
or » « and press »OK« to confirm.
Λ
– T he »Antenna Settings« menu is dis-
played.
7­ Select and set the required option for the
antenna settings with »
Satellite
Press »OK« then select the required satel-
lite with » « or »
V
confirm.
LNB­Type
Press »OK« then select the required LNB
<
Type with » « or »
data and confirm with »
LNB­Power
Set the LNB power to »Off«, »13/18V« or
»14/19V« depending on the LNB type by
< >
using » « or » «.
LNB­selection
See DISEqC mode.
«, »
V
>
« or
« to confirm.
« or » «:
V Λ
« and press »OK« to
Λ
>
«, enter the required
« (green).

ENGLISH
«,
Λ
«
V
97­