Table of Contents
Advertisement
INITIALSET-UP
Searchingchannelsbynameinthe
ChannelEditor
While arranging the channels in the Channel
Editor, you can search and select the channel
name by the first three characters.
1
In the »Channel Editor« menu, select the
search mode by pressing »
2
Select the first character of the channel
name you want to search with »
<
>
»
« or »
« and press »OK« to confirm.
Repeat the entry for the next characters.
– C hannels found will be listed on the right
side of the screen.
>
3
With »
« switch to result section, select the
channel you are searching with »
»
«, and highlight this with »OK«.
Λ
Note:
To change the place of, delete or add the
7
channels to favorites lists, continue reading
the relevant section.
4
To return to the previous menu, press
»BACK
«.
<
5
To exit the »Channel Editor« menu, press
»EXIT«.
DeletingchannelsintheChannel
Editor
1
In the »Channel Editor« menu, select the
channel(s) you want to delete with »
<
>
»
«, »
« or »
«, and highlight the channel
Λ
by pressing »OK«.
– Channel is marked with »✔«.
2
Press »
« (yellow).
– »Tools« menu is displayed.
3
Select the line »Delete« with »
and press »OK« to confirm.
4
To confirm deletion process, select the op-
<
tion »OK« with »
or
to cancel deletion process, select the option
<
»No« with »
« or »
confirm.
5
To exit the »Channel Editor« menu, press
»EXIT«.
---------------------------------------------------------------------------------------------------
« (red).
«, »
V
Λ
« or
V
«,
V
« or »
V
Λ
>
« or »
«;
>
« and press »OK« to
Movingthechannelsinthechannelor-
ganizertodifferentchannelpositions
1
In the »Channel Editor« menu, select the
channel(s) you want to move with »
<
»
«, »
« or »
Λ
sion channel by pressing »OK«.
– Channel is marked with »✔«.
2
Press »
« (green).
«,
Notes:
In case of changing the order of the chan-
7
nels, channel numbers sent by the broad-
caster will be changed.
If more than one channel is selected for
7
moving, channels will be moved one after
the other according to the selection order of
channels.
3
Select the new place of the channel with
»
«, »
V
Λ
confirm.
4
To exit the »Channel Editor« menu, press
»EXIT«.
DisplayingchannelsintheChannel
Editorbyantennatype
If you have more than one antenna type, you
can display channels in the Channel Editor by
antenna type.
1
To display the channels in the »Channel
Editor« menu by antenna type, press »
(yellow).
2
Select the line »Antenna Type« with »
»
« and press »OK« to confirm.
Λ
3
Select »Air«, »Cable« or »Satellite« with
»
« or »
V
– T elevision will switch to the antenna sys-
«
tem you have selected and channels will
be displayed.
4
To exit the »Channel Editor« menu, press
»EXIT«.
>
«, and highlight the televi-
<
>
«, »
« or »
« and press »OK« to
« and press »OK«.
Λ
ENGLISH
«,
V
«
« or
V
25
Advertisement
Table of Contents
