Using Auto Backup To Send Photos Or Videos; Installing The Program For Auto Backup On Your Pc; Sending Photos Or Videos To A Pc - Samsung WB151F User Manual

Using Auto Backup to send photos or videos

You can send photos or videos that you captured with the camera to a PC wirelessly. The Auto Backup feature works only with the
Windows OS.
Installing the program for Auto Backup on
your PC
1
Install Intelli-studio on the PC. (p. 93)
2
Connect the camera to the PC with the USB cable.
3
Click OK on the pop-up window.
•
The Auto Backup program is installed on the PC. Follow the
on-screen instructions to complete the installation.
4
Remove the USB cable.
5
Connect the camera to the PC again with the USB
cable.
•
The camera stores information about the PC, so that the
camera can send files to the PC.
Before installing the program, ensure that the PC is connected to a network.
If no internet connection is available, you must install the program from the
provided CD.
Wireless network (WB150F/WB151F/WB152F only)

Sending photos or videos to a PC

1
Rotate the mode dial to w.
2
Select .
•
If the guide message appears, press [o].
3
Press [m] to set options.
•
To turn off your PC automatically after the transfer is complete,
select Shut down PC after backup
4
Press [o] to start the backup.
•
To cancel sending, press [o].
•
You cannot select individual files to backup. This function
backs up only new files on the camera.
•
The backup's progress will be shown on the PC monitor.
•
When the transfer is completed, the camera will turn off
automatically in approximately 30 seconds. Select Cancel
to return to the previous screen and prevent the camera from
turning off automatically.
113
On.