Using Auto Backup to send photos or videos
You can send photos or videos that you captured with the camera to a PC wirelessly. The Auto Backup feature works only with the
Windows OS.
Installing the program for Auto Backup on
your PC
1
Install Intelli-studio on the PC. (p. 101)
2
Connect the camera to the PC with the USB cable.
3
Click OK on the pop-up window.
The Auto Backup program is installed on the PC.
•
Follow the on-screen instructions to complete the installation
4
Remove the USB cable.
5
Connect the camera to the PC again with the USB
cable.
The camera stores information about the PC, so that the
•
camera can send files to the PC.
Before installing the program, ensure that the PC is connected to a network.
If no internet connection is available, you must install the program from the
provided CD.
Sending photos or videos to a PC
1
On the camera's Home screen, scroll to <Wi-Fi>.
2
Select
You must configure the backup PC information to use the
•
Auto Backup feature. For more details, refer to
"Installing the program for Auto Backup on your PC". (p. 121)
3
Press [m] to set options.
To turn off your PC automatically after the transfer is complete,
•
select Shut down PC after backup
4
Press [o] to start the backup.
To cancel sending, press [o].
•
You cannot select individual files to backup. This function
•
backs up only new files on the camera.
The backup's progress will be shown on the PC monitor.
•
When the transfer is completed, the camera will turn off
•
automatically in approximately 30 seconds. Select Cancel
to return to the previous screen and prevent the camera from
turning off automatically.
111
Wireless network
.
On.