Table of Contents
Advertisement
Before using for the first time
Before using for the first time
Packaging material
Remove all packaging material from
the inside of the appliance.
Protective foil
The appliance is covered with a special
foil to protect it during transportation.
Do not remove the foil until the
appliance has been positioned in its
final location.
Cleaning the appliance
Please refer to the relevant
instructions in "Cleaning and care".
Clean the inside of the appliance and
the accessories.
Danger to health!
The first three batches of ice cubes
made after the ice cube maker is
started up must not be consumed,
as the water will have been used for
the initial rinsing of the water supply
line.
This applies to the initial
commissioning as well as when
using the appliance again after it has
been turned off for a long time.
Clean the ice cube maker.
Clean the entire surface of the
appliance doors before writing on
them for the first time with a
microfibre cloth and lukewarm water.
Then dry the surface with a soft cloth.
22
Connecting the appliance
Connect the appliance to the
electricity supply as described in
"Electrical connection".
Standby
will appear in the display.
Advertisement
Table of Contents
