Periodic maintenance and adjustment
1. Exhaust chamber
2. Exhaust chamber bolt
3. Washer
6. Remove the exhaust manifold
bolts, and then remove the ex-
haust chamber, the power reduc-
tion plate and the gasket.
1. Exhaust manifold bolt
7. Remove the right-side rear shock
absorber mounting bolt and then
tilt the rear shock absorber up-
ward as shown.
1. Rear shock absorber mounting bolt
8. Remove the axle nut while apply-
1
2
3
1. Axle nut
9. Remove the rear arm by removing
1
1. Rear arm
2. Washer
3. Rear arm nut
10. Pull the wheel to the right to re-
To install the rear wheel
1. Apply a light coating of lithium-
2. Install the wheel to the rear axle.
3. Install the rear arm by installing the
4. Install the axle nut.
5. Install the right-side rear shock
1
7-25
ing the rear brake.
1
the nuts and washers.
1
move it from the rear axle.
soap-based grease to the splines
of the rear axle and wheel hub.
washers and nuts.
absorber by installing the mount-
ing bolt.
7
2
3