Page 1
MT300 Matrix Tracking Box Quick Start Guide│快速使用指南 クイック・ガイド│Schnellanleitung Guide Rapide│Guí a rápida Guida rapida│빠른 시작 가이드...
Page 2
English ..................... 1 繁體中文 ..................15 日本語 .................... 15 Deutsch ..................22 Français ..................29 Español ..................36 Italiano ................... 43 한국어 .................... 50...
Package Contents Power Adapter & Cable Ties Tracking Box Unit Cable Fixing Plate (x2) Power Cord (x13) 3.0 x 5mm 3.0 x 5mm M3 x 10mm Screws Rack Mount Flat Head Screw Truss Head Screw (x4) Bracket (x2) (x5) (x4) USB 3.0 Cable (x2) RS-422 Cable Quick Start Guide...
Page 4
Overview 1. Power Button 7. PoE+ Port IEEE 802.3AT 2. Reset Button 8. Ethernet Port 3. Status LEDs 9. HDMI In Port*3 4. HDMI Out Port*2 10. USB In 2.0 Port (Type A)*3 5. USB Out 3.0 Port (Type B)*2 11.
LED Indicator STATUS (Power / System) Status Orange (Solid) Powered on but not Operating Green (Solid) Operating Successfully Green (Flashing) Firmware Updating USB 1 / USB 2 Status Green (Solid) Connected and Ready for UVC / UAC Streaming Green (Flashing) Streaming in UVC / UAC LAN 1/ LAN 2 Status...
Page 6
Cable Fixing Plate Installation 1. Secure the cable fixing plates to the tracking box with 5 flat hat 30 x 5mm screws in the package. 3. Use 13 cable ties in the package to secure 2. Plug in cables. the cables and cable fixing plates. English-4...
Desk Mount Installation 1. Secure the mount brackets on the tracking box. Screw: 4 truss head screws, 30 x 5mm 2. Install the mount brackets and the tracking box under the desk. Screw: 4 screws, M3 x 10mm Server Rack Mount Suggestions (Optional Accessories) For details on optional accessories, consult your local dealer.
Page 8
Connections Front Panel Rear Panel Network English-6...
Page 9
[Note] Camera Connection: You can connect cameras to the tracking box using HDMI, USB, or via Ethernet (LAN). The maximum numbers of simultaneous camera connections are as shown below. Connection Method Maximum Number of cameras HDMI In USB In and Ethernet (LAN) English-7...
Web Setup Access the Tracing Box via AVer IPCam Utility Download the IPCam Utility from https://www.aver.com/download-center and run the IPCam Utility. Click Search, and all available devices will be listed on the screen. Select the tracking box from the list, the device info will be displayed in the Settings field.
Page 11
Or if you want to configure by yourself Connect the tracking box to the network using the PoE+ port. Set up your computer with static IP 192.168.1.x. Type in 192.168.1.168 in your web browser to access the tracking box. [Note] The default network of the tracking box is Static IP, and the default ID/Password are admin/admin.
Page 13
Quick Guide Package Contents CP10-MT Power Adapter & Power Cord* Ethernet Cable Holder * The power cord will vary depending on the standard power outlet of the country where it is sold. English-11...
Page 14
Overview 1. 10.1-inch Touch Screen 7. Kensington Lock 2. Microphone 8. Reset Button 3. Status LEDs 9. Power Jack 4. Speaker 10. PoE+ Port** 5. Rubber Feet 11. USB 2.0 Type A Port *** 6. Bracket for Ethernet Cable Holder* 12.
Page 15
LED Indicator Status Green (Solid) Powered On English-13...
Page 16
PoE+ injector to the CP10-MT and to the network using LAN cables. LAN (not included) DATA OUT +POE port DATA IN port PoE+ injector with power cord Wall outlet (optional) LAN (not included) LAN port on the wall * Please purchase PoE+ injector from AVer. English-14...
Page 17
Ethernet Cable Holder Installation The Ethernet Cable Holder can be used to protect the Ethernet cable from loosening from the PoE+ port. To install the Ethernet Cable Holder to the Bracket on the rear side of CP10-MT, press the holder inward and then push down the holder into the Bracket. Push Press inward...
Need help?
Do you have a question about the MT300 and is the answer not in the manual?
Questions and answers