Table of Contents
Advertisement
13> A Disable/Enable menu appears. Select "Enable" and press <Enter>.
14> Confirm that the setting of "Set Boot from SAN" is [Enable].
Do not select "Back to UEFI Device Manager and RECONNECT DEVICES". Press
<Esc>, when you want to return to the adapter list.
15> If any other ports of this product are connected to the Fibre Channel boot device, Press <Esc> key
to return to the adapter list and setting ports by the same steps from 5>.
Press <Esc> to return to the adapter list. If select "Back to UEFI Device Manager
and RECONNECT DEVICES" and press <Enter>, press <Alt>, <Ctrl> and <Del>
keys simultaneously to reboot the computer.
beginning.
16> Now, you have made settings to start installing an operating system on your Fibre Channel device.
Save changes and exit the STEUP utility of the computer, and start installation.
Then, start the steps from the
Advertisement
Table of Contents
