3-Control Panel - Haier HWF90ANB1 User Manual

3-Control panel

3-10
Spin Speed
3-11
Temp.
3-12
UV Sanitise
3-13
Options
This function reduces washing time.Use for light soiled items. Avaliable for the
Speed up
following cycles: Cotton, Synthetic, Delicate, Shirts, Towels, Bedding,Bulky,
Durable,Downloaded (Baby Care by default).
ECO
Use the ECO option to save water and energy. The cycles of this function
available for is the same as Speed up.
Stain
Use Stain Treatment to treat garments soiled with liquid food stains. Pre-treatment
might be needed to remove stubborn spots, always manufacturer label to avoid
color changes. Stain treatment is available for changes. Stain treatment is avaiable
for Cottons, Synthetics, Delicates, Shirts, Towels, Bedding, Bulky and Durable.
The maximum capacity recommended when using this modifier is 1 kg.
3-14
3-15
3-16
3-17
Speed
3-18
10
3.5.4 Function button"Spin Speed"
Touch this button (Fig. 3-10) to change the spin speed of the programme.
If 0 " " is selected, the laundry will not spin.
3.5.5 "Temp." button
Touch this button (Fig. 3-11) to change the washing temperature of the programme
If no value is illuminated ( the display" -- ") the water will not be heated.
3.5.6 " UV Sanitise" button
Touch this button (Fig. 3-12) , the ultraviolet light turns on during wash and
rinses. UV Sanitisation is by default ON in the Allergy programme.
3.5.7 "Options" button
Touch this button (Fig. 3-13) to choose special functions for programmes.
The symbols are explained as follow:
3.6 "Start/Pause" button
Touch this button (Fig. 3-14) gently to start or interrupt the currently
displayed programme. During programme setting and during programme
run the LED above the button is shining, or if interrupted blinking.
3.7 Key lock
Choosing a programme and then start, touch button "Options" and "UV Sanitise"
(Fig .3-15) for 3 seconds simultaneously to block all panel elements against
activation, panel display
The key lock indicator lights up when the key lock works. Feature is optional
when the machine is running.
The display shows c o I
key lock is activa
3.8 Favourite
Choosing a programme and then start, touch button "Temp." and "Spin Speed "
( Fig .3-17) for 3 seconds simultaneously to save personalised options
for available programme,pa
for all programmes
button "Auto Dose" , "Temp." and "Spin Speed" for 3 seconds simultaneously,
the display shows
. For unlocking please touch again the two buttons.
I - (Fig. 3-16) if a button will be pressed, when the
ted. The change is not running.
nel display
please select Express 15 programme and then touch
(Fig. 3-18).
dEf
°C
. For
restoring the default parameters
NZ AU