Advertisement
INTRODUCTION
We congratulate you on your recent purchase of the Wisco 323 Food Merchandiser. Our company has
tremendous pride in presenting you with a dependable, top quality unit that is designed to provide you
with years of reliable service.
As a safety precaution we recommend all instructions and safety tips appearing in this manual
be reviewed prior to operation.
CONSTRUCTION
Wisco's Display Warmer is constructed of 22 guage brushed stainless steel. If you have a 15" version your
warmer is equipped with tempered glass sides & front. If you have the 7" version your unit is equipped
with tempered glass sides and an acrylic front. Both units feature a chrome plated rack that is easily
removed for quick cleaning.
IMPORTANT: Read the following safety and operation instructions to avoid injury and to avoid
damage to equipment or property.
Plug unit into a properly grounded electrical outlet of the correct voltage, size and plug configuration for this unit. We recommend usage
!
on an individual branch circuit of at least 15 amps for best results. Failure to do so may result in decreased performance of the warmer.
!
Unplug unit from power source and allow to cool completely before performing any maintenance or cleaning.
!
Exterior surfaces on unit may get hot. Use caution when touching these areas to avoid injury.
Only shatter resistant light bulbs which meet or exceed NSF Standards specifically designed for food holding units must be used.
!
Breakage of bulbs not specially coated could result in personal injury and/or food contamination.
This warmer is designed to maintain food product at or above the optimum temperature.
It is not designed or intended to heat up or cook food to the serving temperature. Product is
to be prepared to the appropriate serving temperature before placing in the warmer.
CLEANING INSTRUCTIONS:
!
Do not steam clean or use excessive water on unit to avoid personal injury or electrical shock.
!
Unplug unit from power source and allow to cool completely before performing any maintenance or cleaning.
Unit is not waterproof. Do Not submerge in water. Do not operate if unit has been submerged in water.
!
It is recommended that the interior and exterior surfaces be cleaned daily with a mild soap and damp cloth.
Stubborn stains on base of unit may be removed with a non-abrasive cleaner and damp cloth. Usage of
an abrasive cleanser could scratch or damage the finish of your unit.
The use of any type of ammonia, alcohol or chlorine based brand name household cleaners will cause
cracking of the enclosure/door and is not covered under warranty. Clean unit with warm soapy water
and soft cloth only.
Advertisement
