Page 1
WALL FAN MODEL: EWMF-E1646RC(BK) Owner’s Manual Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the set and quote this information to your dealer when you require service.
REMOVE ALL PACKING MATERIALS FROM THIS PRODUCT BEFORE USING IT. THIS APPLIANCE MUST BE INSTALLED ON A FLAT SURFACE. PLEASE ENSURE THE ELECTRIC SUPPLY TO THIS APPLIANCE IS DISCONNECTED BEFORE INSTALLING. Please read this instruction carefully. It is advisable to keep this instruction manual in a safe place for future reference.
PRODUCT DESCRIPTIONS Front Guard Blade Assembly Remote Control Wall Mounting Bracket (Rear) Control Panel...
Page 4
ASSEMBLY INSTRUCTIONS 1. Remove all packaging material and wire fastener from the product. 2. Drill 3 holes on the wall with a distance complied with the hole on the wall bracket (2). 3. Press the screw anchors provided into holes. 4.
Page 5
OPERATING INSTRUCTIONS 1. ON/OFF Press this key to switch the fan on or off. 2. TIMER+ & TIMER- When this key is pressed repeatedly or kept in pressed status, the time to be set for air delivery increased step by step of each 0.5 hour and sums to 7.5 hours in 15 steps.
NOTES: The fan can start only with the ON/OFF key. The pilot lamps of the speed are in relation to the setting of the wind speed, not to the type. The three lamps for wind speed don’t turn on and off frequently with the change of wind speed, when the fan operates in the state of natural wind or sleep wind.
MAIN SPECIFICATION Voltage : 220-240V/50Hz Rated Power : 60W Fan Size : 16-inch Motor : 3-Speed NOTICE This product must not be disposed together with domestic waste. It has to be disposed at an authorized place for recycling of electrical and electronic appliances. By collecting and recycling waste, you help to save natural resources and make sure the product is disposed in an environmental friendly and healthy way.