Power On After Power Failure Option - Neousys SEMIL-1700 Series User Manual

5.1.7

Power On After Power Failure Option

This option defines the behavior of system series when DC power is supplied.
Value
S0 – Power On
S5 – Power Off
To set "Power On after Power Failure" option:
1. When system boots up, press F2 to enter BIOS setup utility.
2. Go to [Power] > [Power On after Power Failure].
3.
Scroll down to highlight [Power On after Power Failure], press ENTER to bring up
setting options, S0 – Power On or S5 – Power Off, and press ENTER to select the
setting.
Press F10 to "Exit Saving Changes".
4.
SEMIL-1700 Series
Description
System is powered on when DC power is supplied.
System is kept in off state when DC power is supplied.
74