Condensation Container; Childproof Lock; Activating The Childproof Lock - Siemens WT44B202IN User Manual And Installation Instructions

Table of Contents

Advertisement

en Childproof lock
12.12 Condensation con-
tainer
Condensation forms during drying,
which your appliance uses for auto-
matic cleaning. By default, the con-
densation is collected in the appli-
ance's condensation container.
Note: Operate this appliance using
the water drain hose provided. If you
connect the water drain hose
→ Page 14, you do not have to regu-
larly empty the condensation con-
tainer → Page 30.
Emptying the condensation
container
If the drying programme has finished
or the display shows a notification
while the appliance is in operation,
empty the condensation container.
Requirements
¡ The display shows the following
after drying: "End"
¡ or the display shows the following
during operation:
Pull out the condensation con-
1.
tainer, keeping it level.
30
.
Empty the condensation container.
2.
Make sure that you insert the con-
densation container before operat-
ing the appliance.
→ "Inserting the condensation con-
tainer", Page 30
Inserting the condensation
container
Push the condensation container
in as far as it will go.
13 Childproof lock
Secure your appliance against being
operated unintentionally using the
controls.
13.1 Activating the childproof
lock
Press and hold the two
buttons for approx. 3 seconds.
3 sec.

Advertisement

Table of Contents
loading

Table of Contents