Adding Laundry; Cancelling The Programme; Unloading The Laundry; Switching Off The Appli- Ance - Siemens WT44B202IN User Manual And Installation Instructions

Table of Contents

Advertisement

en operation
Press Finish In
2.
play shows the required pro-
gramme end time.
Press Start Pause .
3.
The changed programme end time
is activated.
12.7 Adding laundry
After the programme starts, you can
remove or add laundry at any time.
Press Start Pause .
1.
Open the door.
2.
Add or remove laundry.
3.
Close the door.
4.
Press Start Pause .
5.
12.8 Cancelling the pro-
gramme
Press Start Pause .
1.
Open the door.
2.
Remove the laundry.
3.
→ "Unloading the laundry",
Page 28
12.9 Unloading the laundry
Open the door.
1.
Remove the laundry from the
2.
drum.
12.10 Switching off the appli-
ance
Turn the programme selector to
.
Off
28
until the dis-
12.11 Fluff filter
During drying, fluff from the laundry is
collected in the fluff filter. The fluff fil-
ter protects the appliance from fluff.
Cleaning the fluff filter
If the drying programme has finished
or the display shows a notification
while the appliance is in operation,
clean the fluff filter.
Note: If you do not clean the appli-
ance as described, the appliance's
functionality may be impaired.
Requirements
¡ The display shows the following
after drying: "End"
¡ or the display shows the following
during operation:
Open the door.
1.
Remove the fluff from the door.
2.
Remove the fluff filter.
3.
.

Advertisement

Table of Contents
loading

Table of Contents