Starting The Engine - Toro TimeMaster 21199 Operator's Manual

Starting the Engine

Standard Model
Pull the recoil handle slowly until you feel resistance, then pull it sharply. Allow the rope to return to the engine
slowly.
Note:
If the machine does not start after several attempts, contact an Authorized Service Dealer.
Electric-start Model
You can start the engine on an electric-start model by using either the ignition key or the recoil-start handle.
•
Ignition Key:
1. Charge the battery for 24 hours before using the machine for the first time (A of
Important:
Do not attempt to start the engine with the blade-control bar engaged; otherwise,
you may blow the fuse (B of
2. Insert the ignition key into the ignition (C of
3. Turn and hold the ignition key to the Start position; when the engine starts, release the key (D of
Figure 15).
Note:
Do not hold the ignition key in the Start position for longer than 5 seconds to prevent burning
out the starter motor.
Figure 14
Figure 15).
Figure 15).
Figure 15
14
g234917
Figure 15).
g234919