D-Link DSL-2641B User Manual page 27

Section 3 – Configuration
Using the Setup Wizard - For Bridging connection
Please enter the appropriate information below as provided by your ISP. The
Auto PVC Scan feature will not work in all cases so please enter the VPI/VCI
numbers if provided by the ISP.
STEP 3: RESTART
Click Back to review or modify settings. Click on Restart to apply current
settings and reboot the DSL-2641B router. If your Internet connection does
not work after the router restarts, you can try the Setup Wizard again with
alternative settings or use Manual Setup instead provided you have your
Internet connection details as provided to you by your ISP.
DSL ROUTER REBOOT
Please ensure you do not turn the Router off while it is rebooting. After
the Router has successfully rebooted, you can again configure the Router as
desired. You can also test the WAN connection by accessing the Internet with
your browser.
Close the DSL Router Configuration window and wait for 1 minute before
reopening your web browser. If necessary, please reconfigure your
computer's IP address to match your new configuration.
D-Link DSL-2641B User Manual 27