Advertisement
Chapter 3. Hardware Installation
1)
Connect the male DB-9 end of your serial cable to the serial port socket on the modem labelled
RS-232, and the other end to a serial port on your computer.
2)
Plug one end of the phone line into the jack on the modem labelled LINE and the other end into the
phone jack (usually located on your wall). If you want to use a telephone on the same line, plug the
cord from your telephone into the modem's telephone jack (labelled PHONE).
3)
Plug one end of the AC Power Adapter into the Power Jack on the modem and the other end to a
standard electrical outlet.
4)
Turn on your modem.
Chapter 4. Software Installation
1)
Windows 95/98 will detect a new hardware, then click Next, Device Driver Wizard window will
appear. Choose the option "Search for the best driver for your device (Recommended)" and click
the Next button.
2)
Insert the Installation CD into your CD-ROM. Then choose "CD-ROM ", or you can choose
"Specify a Location" and click the Browse button to browse the directory of your CD driver, such as
"E:\TM-EC5658V\win9x" (assuming your CD-ROM letter is E). Then click the Next button to direct
Windows to start the search.
3)
Windows will prompt that the driver on the installation CD is found. Click Next to start the driver
installation.
4)
When the installation is completed, click Finish.
Chapter 5. Dial for connection to Internet
1)
In Win98, please confirm that you have installed the "Dial network" in the Windows components
"Communication".
2)
In Win98, please confirm that you have installed TCP/IP protocol.
3)
To establish Dial-connection (e.g. Win2k).
a)
Go into Control Panel\Network and Dial-up Connections, double-click New connection, click
Next.
b)
Choose Dial to specified Network, click Next.
c)
Input the telephone number dialed, click Next.
d)
You may allow all users in Win2k or only you to use the connection. Click Next.
e)
Input the name of the Dial Connection.
f)
Finish.
The basic configurations have been finished. You can dial-up to the Internet. You can also click the
Property in the Connection dialog box to set other configurations.
2
Advertisement
