Subscribe to Our Youtube Channel
Related Manuals for GPS PF-e
Summary of Contents for GPS PF-e
- Page 1 Installation, Operation & Maintenance Manual PF-e ™ gpsair.com NOTICE: This product is to be used only as directed. Read entire manual before use. Do not use unless properly installed.
- Page 2 QR code. Location Install the PF-e a minimum of 1’ from the filter rack. For best results install the PF-e 3’ or further from the filter rack. See the application guidance document for more information.
- Page 3 GPS recommends the PF-e is powered constantly and NOT switched with the system or blower. The PF-e will self adjust to voltages from 24V to 240VAC. Output and performance will not be affected by choice of input voltage.
- Page 4 (Neutral: 24/120V -OR- Hot: 208/240V) For your convenience and flexibility of installation the Pf-e is supplied without an electrical conduit and wire. It has a hole sized for ½” trade size conduit fittings (1/2” NPT) and an internal strain relief clamp.
- Page 5 Find an appropriate location for the PF-e and cut a 4” hole. Step 5. Install PF-e device • Insert the PF-e product in the 4” hole • Ensure the direction of airflow matches the airflow indicator on the PF-e. • Using the supplied fasteners attach the PF-e to the duct.
- Page 6 Step 6. Attach the PF-e product · Ensure the PF-e is securely fastened to the duct and the seal is compressed...
- Page 7 CAUTION! Never touch brushes while operating - shock may occur. Cleaning Cycle The PF-e comes with a factory preset cleaning cycle designed to clean the emitters every 4 hours. CAUTION! High Voltage. CAUTION! This product is suitable for mounting to duct of metallic construction only. Installation must be such that the structural integrity of the ducting is not compromised.
- Page 8 © 2023 GPS Air GPS-070-11-R21-PFe-IOM GPS Air is the owner of certain trademarks that appear in our materials. Please visit www.gpsair.com/trademarks for a list of our marks.
Need help?
Do you have a question about the PF-e and is the answer not in the manual?
Questions and answers