Huawei HG630 Quick Start Manual page 3

 The default wireless network name (SSID) and password (
are printed on the label of the HG630's rear panel are preset before delivery.
They are unique and safe. If you do not want to modify them, click Next.
 For security reasons or to make the password easy to remember, you can
change it. For details, see section "Configuring a Wireless Network Name and
Password"
 If the default wireless network name and password have been changed, use
the new ones.
Step 9 Confirm the information you set and then click Submit.
Then check the status of the Internet indicator. When the Internet indicator turns green, you
can access the Internet.
The preceding operations need only be performed once. The next time you power on the
computer, you can access the Internet without any other configurations.
Configuring a Wireless Network Name and Password
When the HG630 is delivered, the wireless network name and password are preset. You can
find them on the HG630's rear panel label. For security reasons or to make the password
easier to remember, change the wireless network name and password as follows:
(The default wireless network encryption mode WPA-PSK/WPA2-PSK is used as an
example)
Step 1 Log in to the HG630's web-based configuration utility.
Step 2 Choose Basic > WLAN to display the WLAN tab.
Step 3 Select Enable WLAN.
Step 4 In SSID, enter a new wireless network name.
Step 5 For Security, select WPA-PSK/WPA2-PSK.
Step 6 In WPA Pre-Shared Key, enter a new password. Use the default settings for other
parameters.
Step 7 Click Submit.
Remember the new wireless network name and password you just set. You will be prompted
to enter this password when connecting wireless devices, such as a computer, to the
HG630's wireless network.
.
3
) which
WLAN Key