OM SYSTEM TG-7 Instruction Manual page 168

2.
Select [Easy CALS] in
button.
3.
Highlight [CALS H] or [CALS] using the
When [CALS H] is selected,
When [CALS] is selected,
When [Off] is selected, the image size and compression rate will be set to the settings that
were in use immediately before the camera was turned off.
4.
Press the MENU button to exit the menus.
For the [Panorama] setting for [Construction] in
C
image may exceed approximately 3M (1920 × 1440), even when the image mode is set to [CALS H]
or [CALS].
Shooting Menu 1 and press the OK
6
FG
will be selected automatically when the camera is turned on.
x
will be selected automatically when the camera is turned on.
w
168
Back
buttons and press the OK button.
SCN
(Scene) mode, the size of the combined
Configuring an image size for the Construction
Shooting Menu 1
1 1 Reset/Assign Custom Modes
Picture Mode
2
AF Area
Easy CALS
X
Off
Set
Menu