2" Flat Head Screw - Sauder Cannery Bridge 431315 Manual

Step 9
å
Insert two LARGE WOOD DOWELS (6) into the BACKS (J and K).
å
Fasten the BACKS (J and K) to the BOTTOM (E). Use four 2" FLAT HEAD SCREWS (20).
å
NOTE: You should start each SCREW a few turns before completely tightening any of them.
å
NOTE: Be sure the WOOD DOWELS in the BACKS insert into the BOTTOM.
431315
K
6
www.sauder.com/service

2" FLAT HEAD SCREW

J
E
20
(4 used in this step)
6
Page 15