1 Eltako Support
This document contains application notes on the use of Eltako's EnOcean elements
together with our gateways.
References:
[1] Technical data of the wireless actuators, teach-in list, operating distances and contents of
Eltako Wireless telegrams:
https://www.eltako.com/fileadmin/downloads/en/_main_catalogue/Gesamt-
Katalog_ChT_gb_highRes.pdf
[2] EEP Viewer:
http://tools.enocean-alliance.org/EEPViewer/
[3] Application by EnOcean for configuration via NFC:
https://www.enocean.com/en/product/enocean-tool/
1.1 Impulse switch FSR61NP
1.1.1 Local settings
The setup is described in detail in product manual, here are briefly described the most important
things.
It has two rotary switches (trimmers) for local setup:
A (upper)
B (lower)
1.1.1.1
Adding devices (teach-in):
1. Set A-LRN (red LED goes blinking)
2. Select teach-in mode by B
3. Trigger a teach-in telegram (LED goes off)
1.1.1.2
Adding an encrypted device:
1. Set A-LRN
2. Turn B to B-min and back three times (red LED starts blinking faster)
3. Trigger a security teach-in telegram (LED goes off) (see note 1)
Now repeat adding the device.
4. Set A-LRN (LED goes blinking)
5. Select teach-in mode by B
6. Trigger a teach-in telegram (LED goes off)
Note:
1. For example, FTKE transmits with the jumper inserted; button (PTM 215) by pressing the upper and
lower buttons at the same time or via NFC app; ... If the device has a dedicated teach-in button and
2023-08-11
A-LRN (upper end)
A-CLR (lower end)
B-max (upper end)
B-min (lower end)
Eltako Support
1/7
Need help?
Do you have a question about the FSR61NP-230V and is the answer not in the manual?
Questions and answers