Zanussi ZFT10210WV User Manual page 5

Table of Contents

Advertisement

Red Alarm Indicator Light
5
SWITCHING ON
Leave the appliance to stand upright for 4 hours
after installation.
1. Insert the plug into the wall socket.
2. Turn the Temperature Regulator clockwise to a
medium position.
The Green On/Off Indicator Light will light up
and Red Alarm Indicator Light will blink.
The lighting up of the Green On/Off Indicator
Light means that the appliance is switched on.
The blinking of the Red Alarm Indicator
Light and the acoustic alarm means an
improper temperature in the freezing
compartment. Press the Acoustic
Signal Stop and QuickFreeze Switch
to deactivate the acoustic alarm. The
alarm indicator continues to flash until
the normal conditions are restored.
When switching on the freezer for the
first time, the Red Alarm Indicator
Light will blink until the internal
temperature has reached a level
required for the safe conservation of
frozen food.
SWITCHING OFF
1. To turn off the appliance, turn the Temperature
Regulator to the O position.
The Green On/Of Indicator Light will switch off.
2. To disconnect the appliance from the power,
disconnect the mains plug from the wall socket.
HIGH TEMPERATURE ALARM
Under normal operating conditions, the internal
temperature of the freezer will ensure the long-term
conservation of the stored food.
The temperature increase above a certain level in
the freezer (-12 °C, for example due to an earlier
power failure) is indicated by flashing the Red
Alarm Indicator Light and sounding the acoustic
alarm.
1. Press the Acoustic Signal Stop. The acoustic
alarm switches off.
The Red Alarm Indicator Light
continues to flash until the internal
temperature has reached a level
required for the safe conservation of
frozen food.
TEMPERATURE REGULATION
CAUTION! Do not place heavy nor
hot objects on top of the appliance to
avoid any damage.
The temperature within the appliance is controlled
by the Temperature Regulator situated on the
control panel.
To operate the appliance, proceed as follows:
turn the Temperature Regulator toward lower
settings to obtain the minimum coldness.
turn the Temperature Regulator toward higher
settings to obtain the maximum coldness.
A medium setting is generally the most
suitable.
However, the exact setting should be chosen
keeping in mind that the temperature inside the
appliance depends on:
room temperature
how often the door is opened
the quantity of food stored
the location of the appliance.
QUICKFREEZE FUNCTION
If more than 3-4 kg of food is to be frozen:
1. Press the QuickFreeze button for 2-3 seconds
to activate the QuickFreeze function 6-24
hours before placing the fresh food in the
freezer, the Yellow QuickFreeze Indicator Light
will illuminate. The compressor will now run
continuously, to ensure that the fresh food is
frozen as quickly as possible.
It is possible to deactivate the
function at any time by pressing
the QuickFreeze button for 2-3
seconds.
2. Place the food in the freezing compartment or
compartments and leave the QuickFreeze
function for a further 24 hours.
3. Once the food is completely frozen, press the
QuickFreeze button for 2- 3 seconds and the
Yellow QuickFreeze Indicator Light will go out.
4. Move frozen food from the freezing
compartments into the storing compartments to
make room for another freezing.
5

Advertisement

Table of Contents
loading

Table of Contents