PAC P18 Safety and operating instructions Introduction Thank you for choosing Chicago Pneumatic brand products. For over a century, the Chicago Pneumatic brand has represented performance and innovation in the pneumatic tool industry. Today the brand is found around the world on a range of pneumatic and hydraulic tools that includes breakers, rock drills, chipping hammers, clay-diggers, picks and busters, scabblers, pumps and a whole lot more.
Safety and operating instructions PAC P18 Drugs, alcohol or medication Safety instructions WARNING Drugs, alcohol or medication To reduce the risk of serious injury or death to Drugs, alcohol or medication may impair your yourself or others, read and understand the Safety judgment and powers of concentration.
PAC P18 Safety and operating instructions Operation, precautions DANGER Exhaust gas hazard The exhaust gas from the machine s combustion engine contains carbon monoxide which is DANGER Explosion hazard poisonous, and chemicals known to the State of When working on certain materials and when using...
Page 8
Safety and operating instructions PAC P18 ► Select, maintain and replace consumables/ WARNING Dust and fume hazard working tools/ other accessories as recommended Dusts and/or fumes generated or dispersed when in the operating and safety instructions. Incorrect using the machine may cause serious and permanent...
PAC P18 Safety and operating instructions WARNING Slipping, tripping and WARNING Nominal pressure falling hazards If the maximum nominal pressure for the hydraulic There is a risk of slipping or tripping or falling, for machine is exceeded, it can result in material damage example tripping on the hoses or on other objects.
The machine is fitted with labels containing machines. No other use is permitted. important information about personal safety and PAC P18 is fitted with an 18 HP Briggs & Stratton machine maintenance. The labels must be in such Vanguard V-Twin air cooled petrol engine.
PAC P18 Safety and operating instructions Noise level label Lifting point label The label indicates the guaranteed noise level corresponding to EC-directive 2000/14/EC. See "Technical data" for accurate noise level. EHTMA The European Hydraulic Tool Manufacturers Association (EHTMA) has categorised hydraulic...
Safety and operating instructions PAC P18 Standard mineral or synthetic oil can be used. Make Hoses and connections sure to only use clean oil and filling equipment. When the machine is used continuously, the oil Ensure that the machine you plan to use is...
PAC P18 Safety and operating instructions To set or check the hydraulic oil flow and the Operation pressure relief valve we recommend using Chicago Pneumatic or similar test equipment. WARNING Involuntary start 0-250 bar (0-3,600 psi) ♦ Involuntary start of the machine may cause injury.
Safety and operating instructions PAC P18 5. As the engine warms up, gradually move the Start and stop choke control (B) to the OPEN position. Starting the engine 6. Move the throttle lever (E) to the position for the required flow.
PAC P18 Safety and operating instructions Every day Every three months Never perform maintenance when the power pack ♦ Check tightness of nuts, bolts, screws and hose is running. fittings. Clean and inspect the machine and its functions ♦ ♦...
Safety and operating instructions PAC P18 Troubleshooting Problem Cause Solution Engine turns over but does not start No fuel Top up tank Fuel line blocked Clear line Fuel tap in the 0 position Turn tap to the 1 position Choke not closed...
PAC P18 Safety and operating instructions Technical data Machine data PAC P18 Height, mm (in.) 720 (28.3) Width, mm (in.) 700 (27.6) Length, mm (in.) 755 (29.7) Temperature range, °C (°F) -20 to 40 (-4 to 104) Weight including oil, kg (lb) 118 (260) Flow, l.p.m (US gal/min)
Safety and operating instructions PAC P18 Noise data Noise Declared values Sound pressure Sound power EN ISO 11203 2000/14/EC Uncertainty K value Type r=1m dB(A) rel 20µPa guaranteed dB(A) rel 1pW dB(A) PAC P18 3392 5184 01b | Original instructions...
PAC P18 Safety and operating instructions EC Declaration of Conformity EC Declaration of Conformity (EC Directive 2006/42/EC) We, Construction Tools EOOD, hereby declare that the machines listed below conform to the provisions of EC Directive 2006/42/EC (Machinery Directive) and 2000/14/EC (Noise Directive), and the harmonised standards mentioned below.
Page 20
PAC P18 3392 5184 01b | Original instructions...
Page 21
PAC P18 3392 5184 01b | Original instructions...
Page 22
PAC P18 3392 5184 01b | Original instructions...
Page 23
PAC P18 3392 5184 01b | Original instructions...