Table of Contents
Advertisement
Printing the Nozzle Check Pattern
Print the nozzle check pattern to determine whether the ink ejects properly from the print
head nozzle.
Note
If the remaining ink level is low, the nozzle check pattern will not be printed correctly.
Replace the FINE cartridge whose ink is low.
Replacing a FINE Cartridge
You need to prepare: a sheet of A4 or Letter-sized plain paper
1.
Make sure that the power is turned on.
2.
Load a sheet of A4 or Letter-sized plain paper in the rear tray.
3.
Pull out the paper output tray and the output tray extension.
4.
Hold down the Stop button until the Alarm lamp flashes orange once,
then release it immediately.
The nozzle check pattern will be printed.
Do not perform any other operations until the machine completes the printing of the
nozzle check pattern.
5.
Examine the nozzle check pattern.
Examining the Nozzle Check Pattern
76
Advertisement
Table of Contents
