Scan Quality (Image Displayed On The Monitor) Is Poor - Canon E400 Series Online Manual

Scan Quality (Image Displayed on the Monitor) Is Poor

Check 1: Increase the scanning resolution if the image is
jagged.
Resolution
Check 2: Set the display size to 100 %.
Some applications do not display images clearly if the display size is too small.
Check 3: If moire (stripe pattern) appears, take the following
measures and scan again.
• Set one of the following settings in the Settings (Document Scan) dialog, Settings
(Custom Scan) dialog, or Settings (Scan and Stitch) dialog of IJ Scan Utility, then
scan from the IJ Scan Utility main screen.
- Set Select Source to Magazine and set Color Mode to Color
- Select the Reduce moire checkbox in Image Processing Settings
Settings (Document Scan) Dialog
Settings (Custom Scan) Dialog
Settings (Scan and Stitch) Dialog
• Click Driver in the IJ Scan Utility main screen, then set one of the following settings.
- Select Magazine for Image Adjustment
- Select the Descreen checkbox
Refer to "Image Corrections and Color
Note
If moire appears when you scan a digital print photo, take the above measures and
scan again.
Check 4: Clean the platen and document cover.
Check 5: If the item is in poor condition (dirty, faded, etc.), click
Driver in the IJ Scan Utility main screen, then set Reduce Dust,
Fading Correction, Grain Correction, etc.
Refer to "Image Corrections and Color
Check 6: If the color tone of images is different from the original
document, take the following measures and scan again.
• Click Driver in the IJ Scan Utility main screen, then set Image Adjustment to None.
Adjustments" for details.
Adjustments" for details.
322