Adding Another M3 And Hub To A Single M3 In Use - Samsung WAM351 User Manual

Adding another M3 and Hub to a single M3 in use

❚
When the M3 in use is connected to the router with a LAn cable
`
Disconnect the LAN cable from the M3 in use.
1
Connect the HUB to the wireless router with the LAN cable, and then plug in the
2
HUB's power cable.
Plug in the power cable of the new M3. The new M3's blue LED pairing indicator starts
3
to flash. Wait until the pairing indicator on the M3 stops flashing. When the indicator
stops flashing, pairing is complete. The M3 may also beep.
Turn off the old M3 by disconnecting the power cable. Then, connect it again.
4
spK Add
Press the
indicator starts to flash. Wait until the pairing indicator on the M3 stops flashing. When
the indicator stops flashing, pairing is complete. The M3 may also beep.
On your smart device, select the samsung Multiroom app. Setup starts.
5
button on the back of the M3. The M3's blue LED pairing
4444 37