Directive Systems & Engineering DSE3333LYK Assembly Instructions

Frequency range:
Number of elements:
Boom length:
Boom diameter:
Mast diameter:
Weight: (assembled)
Connector:
Quantity Description
2 .058"x1" Drilled boom sections
2 Reflectors 1 & 2
1 Driven element
11 Directors 1-11
7 Directors 12-18
12 Directors 19-30
1 Anti-Seize Compound
2 1" Black End Cap
1 2" U-bolt with nuts & lock washers
1 Saddle
Anti-Seize Compound - Apply a small amount of the supplied Anti-Seize Compound to the aluminum joints and
to the threads of the U-Bolts to prevent galling.
BEFORE INSTALLING YOUR NEW ANTENNA, PLEASE BE SURE
CAUTION: While we strive to remove all burrs from all machined parts, there is always the possibility of
sharp edges. We strongly suggest checking the edges and use a fine file, or 400 grit sandpaper,
to remove any burrs that may have been left.
DSE3333LYK Rev 11/21
Directive Systems & Engineering
2702 Rodgers Terrace
Haymarket, VA 20169-1628
www.directivesystems.com
33cm Loop Yagi, Model DSE3333LYK

SPECIFICATIONS

890-910 MHz
33
144 inches
1 inch
2 inches max
5 pounds
Type-N female

PARTS LIST

Note: All hardware is Stainless Steel unless otherwise noted.
TO READ THE ENCLOSED WARNING PAMPHLET.
703-754-3876
Gain:
3 dB Beamwidth
(E plane):
F/B ratio:
Maximum Power:
Stacking distance:
Quantity Description
4-40 x 1 1/4" screw
33
33 4-40 lock nut
8-32 x 1 1/4" screw
2
8-32 x 2" screw
2
4 8-32 hex nut
4 #8 Split Lock Washer
1 Boom to Mast Bracket
1 Boom to Mast Plate
1 Cable assembly w/connector
1 Assembly Manual
18.5 dBi
20º
>20 dB
550 W average
30 inches' vertical
33 inches' horizontal