Getting Started - Curtis STC924 Owner's Manual

Getting Started

Connecting Your Phone
This section is a reference guide to the basic functions and operations of your cordless
telephone. For more detailed descriptions of the operations and features of this telephone,
refer to the Contents on page 1.
1. Carefully remove your cordless telephone from its shipping carton. If there is any visible
damage, do not attempt to operate this equipment. Return it to the place of purchase.
2. Check to be sure you have all items that come with this cordless telephone system. You
should have a HANDSET, BASE UNIT, AC ADAPTOR, BATTERY PACK, TELEPHONE LINE
CORD, BELT CLIP, HEADSET, and Owner's Manual.
L-D-C C-F CALLS BATT MSG DIR
AM
PM
TOTAL
IN USE/
CHARGE
HANDSET BASE UNIT
3. Insert the small plug on the end of the AC ADAPTOR into the POWER-IN CONNECTION
JACK at the back of the BASE UNIT.
4. Plug the AC ADAPTOR into a 120V AC wall outlet.
USE ONLY WITH CLASS 2 POWER SOURCE 9V DC, 300mA.
5. Insert one plug of the TELEPHONE LINE CORD into the house TELEPHONE JACK and the
other end into the TELEPHONE LINE CONNECTION JACK at the back of the BASE UNIT.
(If you have an older 4-prong TELEPHONE JACK, you will need an RJ-11C TELEPHONE
JACK ADAPTOR. This adaptor is available at the same place you purchased your
telephone.)
6. We recommend not placing this unit next to appliances. Doing so may cause interference.
TELEPHONE
JACK
TELEPHONE
LINE CORD
POWER
PAGE
TELEPHONE LINE CORD
120V WALL TELEPHONE LINE
OUTLET CONNECTION
JACK
POWER-IN
CONNECTION
JACK
AC TONE/PULSE
ADAPTOR
SELECT SWITCH
8
BELT CLIP BATTERY PACK
AC ADAPTOR
TONE/PULSE 9VDC 300mA
TEL LINE