Adjusting The Contrast; Setting The Pbx Number; Changing The Flash Time - Curtis STC924 Owner's Manual

Caller ID System Operation
E. Adjusting the Contrast
1. Press and hold the Voice Mail/Func button to enter the menu.
2. Press the 5 button to go to the CONTRAST programming option.
3. Press the Flash/Edit button to change the setting. "4" will begin flashing.
4. Press the SCROLL UP
5. When the desired setting is displayed, press and hold the Re/Pa/Save button to save
the setting. A long "beep" will sound to confirm the setting has been saved.
6. Continue with programming or press the
STANDBY mode.
F. Setting the PBX Number
1. Press and hold the Voice Mail/Func button to enter the menu.
2. Press the 6 button to go to the PBX NUMBER programming option.
3. Press the Flash/Edit button to change the setting. "OFF" will begin flashing.
4. Press the SCROLL UP
PBX system. When not connected to a PBX, the phone will only function normally
when set to "OFF."
5. When the desired setting is displayed, press and hold the Re/Pa/Save button to save
the setting. A long "beep" will sound to confirm the setting has been saved.
6. Continue with programming or press the
STANDBY mode.
G. Changing the Flash Time
1. Press and hold the Voice Mail/Func button to enter the menu.
2. Press the 7 button to go to the FLASH TIME programming option.
3. Press the Flash/Edit button to change the setting. "600" will begin flashing.
4. Press the SCROLL UP
or DOWN button to toggle from 1 to 8 levels of contrast.
Voice Mail/Func
or DOWN button to customize the digit to match your
Voice Mail/Func
or DOWN button to select the desired FLASH TIME.
24
button to return to
button to return to