Function Settings - Curtis STC924 Owner's Manual

Caller ID System Operation

Function Settings

You can change the setting on the HANDSET in the functions menu. Access the functions
menu by pressing and holding the Voice Mail/Func button.
There are 11 settings in the functions menu which can be changed. You can scroll through
the function menu in the listed order by pressing the SCROLL DOWN
Settings can be accessed by pressing the corresponding TELEPHONE KEYPAD button. To edit
a setting, press the Flash/Edit button, use the SCROLL UP
between the setting options, and then press and hold the
changes. Press the Voice Mail/Func button to exit the functions menu.
TELEPHONE Function
KEYPAD
1 Ring Hi/Low/Off: Changes the volume of the ringer on the HANDSET
or turn the ringer OFF.
Language: Changes the language that appears on the LCD Screen.
2
Choose between English, French, or Spanish.
First Ring On/Off: Turns the first ring of the phone OFF so that it does
3
not ring until Caller ID information has been displayed. Particularly useful
when using the PREFERRED and BLOCKED CALL features or the
PRIVATE and UNAVAILABLE ring settings.
4
Time Set: Changes the time and date.
Contrast: Adjusts the brightness of the LCD Screen for optimum
5
viewing.
6 PBX Number: Inserts if a "PBX Number" before an outgoing number is
dialed. Select the number (0-9) which is required to access an outside
line when using a switchboard system, and the phone will auto-
matically dial the PBX number and a pause before any speed dial or
Caller ID callback number. Factory setting is "OFF."
Flash Time: Changes the flash time to accommodate the phone
7
service in your area.
Pause Time: Changes the number of seconds that a pause lasts
8
when using programmed pauses in your speed dial numbers or
after your PBX number.
or DOWN
Re/Pa/Save
21
button.
button to toggle
button to save the